Resinous Flooring: Endüra Resin Chip System

Endüra™ is a high performance Grade III resin flooringsystem designed to be used in garage floors, basement floors, workshopfloors, laundry room floors, locker room floors, restaurants, foodservice areas where return to service is extremely important. Thissystem combines the benefits of Epoxy resins and Polyaspartic technology.

Epoxy resins offer better wet-ability and adhesion to various substrateswhere as Polyaspartics offer very high abrasion resistance, hot-tirepick up resistance, UV stability and excellent chemical resistance.

endüra™ highperformance Grade III resin system

consistsof:

a. application of endüra E21—100% solids, pigmented
epoxy coating that is broadcasted with blended colored
resin chips

b.application ofendüra P70—clear Polyaspartic top coat

key benefits

• Use of epoxy resins ensures superior wetting and excellent bonding to the substrates
• Epoxy resin designed for moisture insensitive cure
• Excellent abrasion—impact and hot tire pick-up resistance
• Chemical resistance—resists chemicals like brake fluid, gasoline, mek, hydraulic oil, etc.
• UV light stable—superb clarity top coat
• Fast cure—return to service within hours after the application of the top coat
• Zero VOC system

More chip colors are available...

detailedproduct information

important!: For successful installation of anyresinous flooring systems a concrete surface profile (CSP) of 4 to5 is recommended. If the installer is unable to achieve the CSP of4 or 5, application of primer, endüra E02, may be necessary.

endüra E02

It is a 100% solids, moisture tolerant epoxy primer for concreteand masonry surfaces. It combines the properties of water insensitivitywith good wetting properties. endüra E02 provides excellentfilling and sealing properties needed under high performance epoxyfloor coatings on concrete. The moisture tolerance of endüraE02 allows it to be applied to damp concrete after surface preparation.This includes bonding “old to old” or “new to old” concrete.

advantages

• Low modulus – stress relieving
• Fast cure formulation available for priming under coatings
• Moisture insensitive cure
• Conforms to ASTM C-881 requirements
• Low viscosity-good wetting properties

endüra E21

Endüra E21 is a 100% solids, pigmented epoxy floor coatingdesigned to provide high gloss, chemical resistant protection. Itis essentially odorless and can, therefore, be used in occupied areas.endüra E21 provides a smooth, high gloss finish or, in a heavybody form, an orange peel, texture finish. It can be broadcastedwith resin chips.

advantages

• Low odor during application and cure
• Zero VOC
• Easy application and clean-up

endüra P70

Endüra P70 is a two component, ultra high solids, aliphaticPolyaspartic polyurea designed to provide high gloss, UV stable (non-yellowing)and chemical resistant protection. endüra P70 is a superior,new generation product exhibiting fast cure and excellent stain resistance.

endüra P70 has very low odor and can be applied indoors inoccupied areas. It is generally used as a clear, high gloss finishon eNdura high performance resin chip system.

ADVANTAGES

• VOC compliant
• Fast set times
• Excellent UV resistance
• Very high gloss
• Excellent abrasion resistance
• Chemical & stain resistance
• Low odor; can be used in occupied areas