AEC Online
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share

We clean oil to better quality than when it was new

 
  Other News
  Subscribe to newsletter  
18 Oct 2017

Waagene Oil Purifiner is a 'bypass' oil maintenance system that connects to a hydraulic or lubricating system to continuously remove water and particles.

We clean oil to better quality than when it was new

The root cause of many mechanical failures is contaminated oil and fuel. By maintaining oil and fuel quality by removing water and particulates, there will be less mechanical failures and downtime, reduced operating costs and consumption, and enhanced life of the equipment. Combined, the significant benefits of maintaining oil quality will make your business 'greener'.

Waagene Oil Purifiner is designed for continuous maintenance of hydraulic and lubricating oils. Feedback from our users is that the Waagene Oil Purifiner is a minimal investment that offers savings over the short term.

In the longer term it provides significant savings by extending the interval for oil changes and reducing maintenance costs. There is also minimal consumption of filter cartridges since the water is not absorbed in the filter cartridge, but rather evaporates away.

Waagene Purifiner has been sold internationally for over 15 years and provides the best oil cleaning and oil maintenance, at the lowest cost.

Test on Texaco Regal 68 Hydraulic Oil used for 17,500 Hours / 2 Years


Research done by 'Norske Shell University' and many others, conclude that up to 80% of mechanical breakdowns are due to contaminated oil.

Two measures must be taken to achieve optimum oil quality:

  • Remove particle contamination, such as iron (Fe), copper (Cu), Silicon (Si) and other metals.
  • Remove chemical contamination in the oil, mostly water.

Particle contamination is a result of mechanical wear, dust, maintenance operations, defective gaskets, clogged filters, etc. Water contamination typically is a result of condensation, leaks into system, air valves or compressors or other equipment in the system. In addition to being corrosive, water may in high-pressured systems be highly abrasive on the internal surfaces of the equipment.

The figures above show test results performed on oil with 17,500 hours of operation, compared to oil cleaned by Waagene Oil Purifiner and new oil. The results are clear, Waagene Oil Purifiner makes the oil better than new.

Learn more about Waagene Purifiner Technology - www.purifiner.co



Skyscraper Banners