About Accessories > Xypex Megamix Series
SpecificationsAccessories > Xypex Megamix Series
Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. Megamix I is a unique blend of Portland cement, treated silica sand, fibers and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush or trowel up to a thickness of 3/8 in. (10 mm).
Megamix I
Megamix II for rehabilitation
Megamix II + Bio-San for rehabilitation
Megamix I
Megamix II
Megamix II + Bio-San
Megamix I
Megamix II
Megamix II + Bio-SanMegamix I & II is a repairing mortar specifically for the waterproofing and resurfacing of deteriorated concrete surfaces, whereas Megamix II + Bio-San is specifically formulated for restoration of concrete damaged by microbial induced corrosion, abrasion/erosion and chemical attack.
Xypex Megamix II is a thick repair mortar for the patching and resurfacing of deteriorated concrete. Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength. It is a one component mortar and can be either sprayed or trowel applied at a thickness of 3/8" - 2" (10 - 50 mm).
Xypex Megamix II + Bio-San is a resurfacing mortar specifically designed for the restoration of deteriorated concrete surfaces caused by microbial induced corrosion, abrasion/erosion and chemical attack. It is formulated for ease of application, superior bond, low shrinkage, high strength and resistance to microbial, acid and sulphate attack. Megamix II + Bio-San contains bioactive mineral solids which fix permanently within the repair mortar matrix impairing bio-film formation, thus limiting microbial induced corrosion of the repaired surface in sewer environments. It significantly extends the life of sewer and waste water infrastructure by inhibiting the growth of acid causing sewer bacteria such as Thiobacillus that cause MIC (microbial induced corrosion). In most applications, such as manhole resurfacing, Megamix II + Bio-San can be used to replace epoxy linings and calcium aluminate repair mortars.
Recommended for:
Advantages
03 00 00 - Concrete
03 10 00 - Concrete Forming and Accessories
03 20 00 - Concrete Reinforcing
03 30 00 - Cast-in-Place Concrete
03 40 00 - Precast Concrete
03 50 00 - Cast Decks and Underlayment
03 60 00 - Grouting
03 70 00 - Mass Concrete
03 90 00 - Concrete Curing Agent and Admixture
07 10 00 - Dampproofing and Waterproofing
07 14 00 - Fluid-Applied Waterproofing
07 16 00 - Cementitious and Reactive Waterproofing
07 17 00 - Bentonite Waterproofing
09 34 00 - Waterproofing-Membrane Tiling