About Dryshake > Xypex Concentrate DS Series
Dryshake > Xypex Concentrate DS Series
Concentrate DS becomes an integral part of the concrete surface thereby eliminating problems normally associated with coatings (e.g. scaling, dusting, flaking and delamination). The active chemicals react with the moisture of the fresh concrete causing a catalytic reaction which generates a non-soluble crystalline formation within the pores and capillary tracts of the concrete.
Concentrate DS-1
Concentrate DS-2
Xypex Concentrate DS-1 and DS-2 is available in 60 lb. (27.2 kg) pails.
Under normal conditions, the coverage rate for Xypex Concentrate DS-1 is 1.75 lb./sq. yd. (0.95 kg/m2) and the coverage rate for Xypex Concentrate DS-2 is 6.75 - 7.5 lb./sq. yd. (3.6 - 4.0 kg/m2), depending on the degree of abrasion resistance required.
Concentrate DS-1 & DS-2
Xypex Concentrate DS-1 and DS-2 are Xypex "dryshake" products installed into the horizontal surface of freshly laid concrete.
Concentrate DS-1 is formulated specifically for waterproofing and to provide protection from aggressive chemicals.
Concentrate DS-2 provides these same properties but additionally enhances the abrasion resistance by incorporating a hardener.
Recommended for:
Advantages
Packaging
Coverage
Brochures | Specifications | CAD details
03 00 00 - Concrete
03 10 00 - Concrete Forming and Accessories
03 20 00 - Concrete Reinforcing
03 30 00 - Cast-in-Place Concrete
03 40 00 - Precast Concrete
03 50 00 - Cast Decks and Underlayment
03 60 00 - Grouting
03 70 00 - Mass Concrete
03 90 00 - Concrete Curing Agent and Admixture
07 10 00 - Dampproofing and Waterproofing
07 14 00 - Fluid-Applied Waterproofing
07 16 00 - Cementitious and Reactive Waterproofing
07 17 00 - Bentonite Waterproofing
09 34 00 - Waterproofing-Membrane Tiling