Helga

Composed by:

• 2 lateral supports, armrest with spiral motifs, made of cast iron EN-GJL-200 according to UNI 1561, weight 28 kg / each.;
• 10 bars in the chamfered at the four corners of exotic wood whose ends are flush with the side profiles.Each plank is fixed to the supports with a pair of double yellow antique galvanized steel bolts;
• Central rompitratta containment Fe 360B steel galvanized.

  This article is also available as a bench consisting of:
  

  • 2 side supports with spiral motifs, made of cast iron EN-GJL-200 according to UNI 1561, weight 20 kg / each.prepared for the accommodation of wooden bars;
  • 8 bars in the chamfered at the four corners of exotic wood whose ends are flush with the side profiles.Each plank is fixed to the supports with a pair of double yellow antique galvanized steel bolts;
  • Central rompitratta steel containment.
  
  Finish:

  Blasting, primer-component zinc immersion, spray a coat of the same zinc phosphate primer, finishing powder dried in an oven of gray cast iron (minimum thickness. 180 microns), guaranteed minimum 2000 hours of salt spray;
  the wood is treated with a coat of primer and glossy exterior.

  Fixing:

  The side supports are designed for tassellaggio ground.

  Technical parameters:

  Total space:
  1650x680x800h bench mm,
  seat height 420 mm,
  total weight 80 kg.
  1650x650x420h bench mm,
  seat height 420 mm,
  total weight 65 kg.